| Workorder | YGV02 | Priority | Normal Turn Multi-Layer |
| Process | Archive | Cam | |
| Company Name | COMP-X | Due Date | 9/01/14 |
| Part Number | 6923-3368-05B2 | Number of Boards/Panel | 1 |
| Number of Panels Made | 8 | Number of Boards Ordered | 6 |
| Number of Layers | 20 | Panel Thickness | .075 |
| Project Manager | Sales Contact | ||
| Shoporder | Panel Size | 18X12 | |
| Total Job Value | 18,000.00 | Value Per Board | 3,000.00 |
| Notes | CC-PTH-FLASH-PTH-DRILL-PTH-FLASH-PTH-SNPB-GOLD-LPI-L-ROUTE-TEST | Material | |
| PEP mean | 1.76 | PEP Operator | Adrian Smith |
| PEP date | 2014-06-12 11:12:25.0 | DC Plating rack | |
| DC Plating Date | DC Plating cell(s) | ||
| DC Plating Area Top | DC Plating Area Bottom | ||
| DC Plating spec | DC Plating operator | ||
| DC Plating Minimum Cu Deposit | DC Plating Maximum Cu Deposit | ||
| DC Notes | Minimum Hole Diameter | ||
| Pluritec Operator | Scott Zaboski | Pluritec Date | 2014-06-19 21:27:52.0 |
| Plurietc X comp | .0011 | Pluritec Y comp | .0022 |
| Outer Print Date | Layer | ||
| Standard Deviation | Mean Registration | ||
| Outer Layer Etch Operator | Outer Layer Etch Date | ||
| Trace Width Before Outer Layer Etch | Trace Width After Tin Strip | ||
| Cu Thickness at Outer Layer Etch | Did panels need splashed? | ||
| Line Speed of Outer Layer Etch | |||
| Tin Strip Date | Tin Strip Operator | ||
| HAL Date | HAL Operator | ||
| HAL Bake Time | HAL Time Since Last Baked | ||
| HAL Air Knife Gap | HAL Double Flux | ||
| HAL Double Dip | HAL Dwell Time | ||
| HAL Air Knife Pressure Front | HAL Air Knife Pressure Rear | ||
| HAL Withdrawal Turns | HAL Gold Fingers | ||
| HAL Cold Press | HAL Notes | ||
| PPG Date | PPG Operator | ||
| PPG Run Speed | PPG Step Tab | ||
| PPG No. Of Panels | PPG Stripper Date | ||
| PPG Stripper Operator | PPG Stripper No. Of Panels | ||
| AOI Before Etch Start Time | AOI Before Etch Stop Time | ||
| AOI Before Etch Run Time | Touch Up Start Time | ||
| Touch Up Stop Time | Touch Up Run Time | ||
| AOI After Etch Start Time | AOI After Etch Stop Time | ||
| AOI After Etch Run Time | Repair Inners Start Time | ||
| Repair Inners Stop Time | Repair Inners Run Time | ||
| AOI Before Plating Start Time | AOI Before Plating Stop Time | ||
| AOI Before Plating Run Time | AOI Final Start Time | ||
| AOI Final Stop Time | AOI Final Run Time | ||
| Repair Outers Start Time | Repair Outers Stop Time | ||
| Repair Outers Run Time | |||
| Job Start Date | Job End Date | ||
| Days to Complete | |||
| On-Time Delivery Ratio | Ship Date | ||
| Original Milestones | Process Milestones | ||
| Bake Time | Date Ship Date |